home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Windows Expert
/
Windows Expert.iso
/
drivers
/
twin3bta.zip
/
README.DOC
next >
Wrap
Text File
|
1991-12-12
|
3KB
|
75 lines
Tseng ET4000 - Windows 3.0 and 3.0a Display Drivers
INSTRUCTIONS - FIRST TIME WINDOWS 3.0 and 3.0a INSTALLATION
Follow the instructions contained in the WIN30DRV.DOC file to install the
Tseng ET4000 display drivers.
INSTRUCTIONS - WINDOWS 3.0 or 3.0a ALREADY INSTALLED
To use the Tseng ET4000 Windows drivers you need to copy the following
files into the \WINDOWS\SYSTEM subdirectory.
VGA443.DRV
VGA448.DRV
VGA463.DRV USES 8514 FONTS
VGA463S.DRV USES VGA FONTS
VGA464.DRV USES 8514 FONTS
VGA464S.DRV USES VGA FONTS
VGA468.DRV USES 8514 FONTS
VGA468S.DRV USES VGA FONTS
VGA474.DRV
VGA478.DRV
VGA414.DRV
VGAMONOX.GR2
VGACOLRX.GR2
VDDTLI4.386
SETUP.INF SETUP.INF FOR WINDOWS 3.0
SETUP.W3A SETUP.INF FOR WINDOWS 3.0a
If you have ALREADY installed Windows 3.0, you can copy the above list of
files into the \WINDOWS\SYSTEM subdirectory. After you copy the files, change
the display configuration from within Windows itself to one of the extended
drivers. See the Windows documentation for further information.
IMPORTANT
If you have Windows 3.0a, you also need to copy the SETUP.W3A file as SETUP.INF
before you run the SETUP program.
When you run the Windows Setup to change to a different driver Windows may
prompt you for some of the Windows Installation diskettes. The drivers use
display fonts which are contained on the standard Windows distribution
diskettes.
The enclosed drivers are generic and should work with most ET4000 based boards.
The drivers have various display memory requirements and of course your display
monitor must be able to support the resolution you select.
The drivers support the following:
Resolution Mode Minimum display Driver name Windows Font
(HEX) memory required
640x480x2 11h 256kb VGAMONO.DRV ** VGA
640x480x16 12h 256kb VGA.DRV ** VGA
800x600x16 29h 256kb VGA464.DRV 8514
800x600x16 29h 256kb VGA464S.DRV VGA
1024x768x16 37h 512kb VGA474.DRV 8514
1280x1024x16 3Dh 1 meg VGA414.DRV 8514
640x480x256 2Eh 512kb VGA448.DRV VGA
640x480x32k 2Eh xx 1 meg VGA443.DRV VGA
800x600x256 30h 512kb VGA468.DRV 8514
800x600x256 30h 512kb VGA468S.DRV VGA
800x600x32k 30h xx 1 meg VGA463.DRV 8514
800x600x32k 30h xx 1 meg VGA463S.DRV VGA
1024x768x256 38h 1 meg VGA478.DRV 8514
** uses Windows 3.0 or 3.0a supplied VGA driver
xx requires a ET4000 BIOS which supports the Sierra HICOLOR mode
IMPORTANT
It is important that the drivers be installed properly, replacement
grabbers (GR2 extension) and Virtual-Display-Device handler (386 extension) are
included to properly support the extended feature set of the ET4000 VGA chip.